Applied-motion TSM17C-1CG Uživatelský manuál stáhnout pdf (Strana 21)

Rev. A

920-0085

TSM17C Hardware Manual

4 Troubleshooting

LED Error Codes

The TSM17C uses red and green LEDs to indicate status. When the motor is enabled, the green

LED ashes slowly. When the green LED is solid, the motor is disabled. Errors are indicated by

combinations of red and green ashes as shown below. This feature can be disabled for certain

warnings but not for alarms. See software manual for information on how to do this and which

warnings may be masked.

Code Error

Solid green no alarm,motor disabled

Flashing green no alarm,motor enabled

1 red,1 green

motor stall (optional encoder only)

2 red,1 green

ccw limit

2 red,2 green

cw limit

3 red,1 green drive overheating

3 red,2 green internal voltage out of range

3 red,3 green

blank Q segment

4 red,1 green power supply overvoltage or excess regen

4 red,2 green power supply undervoltage

4 red,3 green

ash memory backup error

5 red,1 green Over current/short circuit

6 red,1 green Open motor winding

6 red,2 green

bad encoder signal (optional encoder only)

7 red,1 green

communication error

7 red,2 green

ash memory error

1 2 ... 16 17 18 19 20 21 22 23 24 25

Žádné komentáře

Applied-motion TSM17C-1CG Uživatelský manuál Strana 21